既可单独工作也可任意组合控制，这是ET系列多功能时控器的一大亮点--多功能

This is a highlight of ET series multi-function time controller multi-function time controller

模式1：普通时控模式，用户设

Mode 1: normal time control mode, user set

定开关灯时间，开灯范围00:00到23:59；关灯范围00:00到23:59

Set the time of turning on and off lights, the range of turning on lights is from 00:00 to 23:59, and the range of turning off lights is from 00:00 to 23:59

模式2：光控模式，开关灯时间由光控探头根据事先设置的光照度进行控制

Mode 2: light control mode, the light switch time is controlled by the light control probe according to the preset light intensity

模式3：光控时控模式，是同时启用模式1和模式2两种功能，光控优先级高于时控优先级。当时间处在光控开启的时间段内，系统采用光控模式，否则采用时控模式。能实现白天暴雨、浓雾灯天气开灯，晚上半夜关灯。控制器输出为并行输出，两种模式均可共用同一个端口输出。

Mode 3: light control time control mode, which enables mode 1 and mode 2 functions at the same time, and light control priority is higher than time control priority. When the time is in the period of light control on, the system adopts light control mode, otherwise it adopts time control mode. It can turn on the light in heavy rain and fog in the daytime and turn off the light in the middle of the night. The output of the controller is parallel, and the two modes can share the same output port.

5、光控和时控功能开启或关闭可任意独立控制；

5. The light control and time control functions can be opened or closed independently;

6、光照度控制动作点可任意编程设定：光照度自由设定；

6. The illumination control action point can be set arbitrarily: the illumination can be set freely;

7、光控参数一旦设置立即在液晶屏上同时显示光控设定参数和光照度值；

7. Once the light control parameters are set, the light control setting parameters and illumination values are displayed on the LCD screen at the same time;

8、光控输出回路可任意定义：根据需要可以在输出1-2回路中任意指定哪路或几路为光控节能输出，这是ET10x.1多功能时控器的一大亮点—输出定义灵活；

8. Optical control output circuit can be defined at will: according to the need, which one or more of the output 1-2 circuits can be specified as the optical control energy-saving output, which is a highlight of et10x. 1 multi-functional time controller - flexible output definition;

9、内置二级防雷电路，增强设备可靠性，抗干扰能力强

9. Built in secondary lightning protection circuit, enhance equipment reliability, strong anti-interference ability

10、流水线作业生产，确保产品质量一致性,“三防”处理电路板、适应恶劣环境可靠性更高；

10. Assembly line production to ensure product quality consistency, "three proofs" processing circuit board, adapt to harsh environment, higher reliability;

11、可装备用电池，备用电池启用时1分钟内无人操作自动关机(增加备用电池使用寿命)

11. It can be equipped with battery. When the backup battery is enabled, it will be automatically shut down by unmanned operation within 1 minute (increase the service life of the backup battery)

12、设置数据自动保存，保存时间>10年

12. Set data auto save, save time > 10 years

13、输出回路：1-2路，每路4时段任意编程设定

13. Output circuit: 1-2 channels, each channel can be programmed for 4 periods

14、内置开关电源模块，适用85~265VAC的宽电压范围。

14. Built in switching power supply module, suitable for 85 ~ 265vac wide voltage range.

15、内置可充电电池，使用更加方便。无外部电源时，10s钟内无人操作自动待机。

15. Built in rechargeable battery, more convenient to use. When there is no external power supply, no one will operate within 10s and stand by automatically.